Kerosene Forced Air Portable Heater – MH-0075-0M10

$400.00

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank

Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection

Motor: Heavy-duty, high quality cast aluminum enclosed electric motor

Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor

Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

SKU: MH-0075-0M10 Categories: , Tags: , , ,

Description

MH-0075-0M10

Frame: Rugged steel body · Extension cord wrap · Powder coated hood and fuel tank
Burner Head: Clamped hoses · Secured photo cell · 1-piece cast aluminum · Secured fully insulated ignition connection
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Components: Built-in temperature control thermostat with control dial · High performance fan · Power switch · Secured internal components · Integral overheat and flame-out safety · Fuel gauge · Integrated fuel pressure gauge · Oversized fuel cap · High limit temperature shut-off · Sure start ignition for cold temperature starts · Dual connector ignitor
Factory tested for multiple fuels: Kerosene, JP8/Jet A fuel, No. 1 or No. 2 fuel oil and No. 1 or No. 2 diesel fuel

For use in workshops, garages, construction sites and farms with proper ventilation.

Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.

Please see heater “Owner’s Manual” included with each heater for a complete list of important safety information.

Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.

Specifications

Hot-Air Flow
240 CFM
Air Pump Pressure
4.0 PSI
AC Power
120 Volt/60Hz/1.5 Amp
Fuel Consumption
0.56 gal./hr.
Heat Output
75,000 BTU
Max. Operating Hours
8.9 hours
Fuel Tank Capacity
5.0 gallons
Motor Size
1/8 HP
Heating Area
1,700 sq. ft.
Multi-Fuel Capable
Yes

Weights & Dimensions

Net Weight
28 lbs.
Shipping Weight
33 lbs.
Length
30 in.
Width
13 in.
Height
15 in.

Additional information

Weight 33 lbs
Dimensions 30 x 13 x 15 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.