Kremlin PMP-150 W/FPRO Airspray Manual Pressure Spray Gun – LVLP-09-XLVB


Kremlin PMP-150 W/FPRO Airspray Manual Pressure Spray Gun – LVLP-09-XLVB, with 5 gallon rod & 25′ hoses


Perfectly balanced, the FPro spray gun provides a superior finish for all painters. SAMES KREMLIN offers the largest range of spray guns and accessories for all FPro applications in the high finishing markets.


  • New Standard in Airspray
  • Performance At Your Fingertips
  • Effortlessly Perfect Spraying
SKU: 668-759-004 Category: Tags: , , ,


Kremlin PMP-150 W/FPRO Airspray Manual Pressure Spray Gun – LVLP-09-XLVB, with 5 gallon rod & 25′ hoses

FPRO Performance

The FPro spray gun gives the perfect finishing available for all painters

  • 1 The widest range of spray guns and accessories for all applications in markets that require high finishing spraying.
  • 2 Patent pending restrictor paint speed controller and patent pending Vortex spin effect delivers a perfect atomization with very high     transfer efficiency (up to 78% in HVLP)
  • 3 Three atomization and aircaps technologies: Conventional, LVLP and HVLP versions available
  • 4 Three different adjustment knobs to get the perfect spray pattern in every conditions


  • 5 Perfectly balanced for reduced repetitive strain injuries
  • 6 The FPro is an extension of the arm and is a natural working tool for painters.
  • 7 High level of sensation on the trigger for a perfect painting application
  • 8 Reduced handle volume, ideal for operators with small hands


  • 9 Elegance of the design, reputable metal, high quality of machining and anodization make the FPro – the ultimate spray gun application solution
  • 10 Simplified and quick maintenance thanks to the reduced number of components
  • 11 New generation of super light hoses, lightweight spray gun body and ergonomic handling, FPro applies the coating with ease and less effort.

PMP-150 Performance

  • Simple and robust pump
  • Compatible with water-based materials due to its treated fluid section and components


  • Possibility to use a large range of materials with a viscosity up to 2,000 cps thanks to large outlets
  • Compatible to a large range of material due to multiple seal kit choices for the fluid section
  • Less waste during flushing to prevent material loss


  • Easy operation and maintenance due to its simple and optimized design
  • Chrome treated stainless steel improves abrasion resistance and low friction
PMP 150 E is the perfect solution to pump abrasive water-based coatings.



Designation Value Unit: metric (US)
Pressure Ratio 1 : 1
Maximum Fluid Pressure 6 (87) bar (psi)
Maximum Air Pressure 6 (87) bar (psi)
Weight 5 (11) kg (lbs)
Maximum Temperature 50 (122) °C (°F)
Cylinder 100 (3.4) cc (oz)
Sound Level < 70 dBa
Fluid Output at 30 cycles/mn 3 (0.8) l/min (gal/mn)
Free Flow Rate 19 (5) l/mn (gal/mn)
Air Consumption at 30 Cycles/mn at 4 Bar (60 psi) 1.1 (0.6) m³/h (cfm)
Air Inlet F 3/8″ BSP
Fluid Outlet F 3/8″ BSP
Fluid Inlet F 3/8″ BSP
Number of cycles per liter of products 10
Height 22 (8.7) cm (in)
Width 20 (7.9) cm (in)
Depth 15 (5.9) cm (in)
Wetted parts polypropylene, PTFE, polyurethane
Diaphragm material polyurethane

Additional information

Weight 6 lbs
Dimensions 8 × 6 × 2 in


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.