Description
Performance
- Chrome treated stainless steel for an improved abrasion resistance and low friction
- Quiet and balanced air motor for a constant delivery
- Easy priming/flushing thanks to pump priming at very low air pressure
Productivity
- Less friction
- Large foot valve to handle material viscosity up to 2 000 cPs
- Designed to eliminate dead zone: facilitates priming and flushing and prevents any product loss
Sustainability
- Reliable air motor: 45% less spare parts than competitors
- Optimized fluid section: 50% less parts than competitors
- Treated stainless steel fluid section: compatible with water-based materials
- Closed construction for protection against dust and operator safety
- Optimum seal performance: upper spring loaded GT packing + PTFEG polyfluid seal
- Use of a single GT seal: no throat packing maintenance and lower friction
The Sames Kremlin Airspray 02C85 piston pump is based on 80 years of SAMES KREMLIN technical expertise, innovation and dedication to our customers. This pump is designed to apply a large range of materials while reducing labor and maintenance costs and articulates around 3 strong themes: Efficiency, Optimization and Simplicity.
Together with SAMES KREMLIN airspray guns, the Airspray 02C85 piston pump provides exceptional performances (Quality of finish, high transfer efficiency). To meet all customer requirements, the multipurpose design allows a use in various airspray & electrostatic airspray applications.
TECHNICAL DATA TABLE
| Designation | Value | Unit: metric (US) |
|---|---|---|
| Pressure Ratio | 2 : 1 | |
| Maximum Fluid Pressure | 10 (144.9) | bar (psi) |
| Maximum Air Pressure | 6 (87) | bar (psi) |
| Maximum Temperature | 60 (140) | °C (°F) |
| Cylinder | 85 (2.9) | cc (oz) |
| Sound Level | 81 | dBa |
| Fluid Output at 30 cycles/mn | 2.6 (0.7) | l/min (gal/mn) |
| Free Flow Rate | 5.1 (1.3) | l/mn (gal/mn) |
| Air Consumption at 30 cycles/mn at 4 bar (60 psi) | 2.1 (1.2) | m³/h (cfm) |
| Air Inlet | F 3/8″ BSP | |
| Fluid Outlet | M 3/8″ NPS | |
| Fluid Inlet | M 18×125 | |
| Number of Cycles per liter of products | 12 | |
| Sealing Packing Lower Acetal Resin Seal | ||
| Sealing Packing Upper GT cartridge with polyethylene packing | ||
| Height | 41 (16.1) | cm (in) |
| Wetted Parts: Aluminum, Stainless Steel | ||
| Width | 28 (11) | cm (in) |
| Depth | 17 (6.7) | cm (in) |
| Weight | 5 (11) | kg (lbs) |
Reviews
There are no reviews yet.